DENIOS INC
1152 Industrial Blvd.1
Louisville
KY 40219

Tel.: +1 502 9337272
Email: info1@denios-us.com
Internet: www.denios-us.com

3 steps to finding the right pump

Drum Pumps allow safe and accurate drum filling. Depending on the requirements, they are available in different versions. The suitability of the pump for the medium to be filled, the container size, and the desired delivery rate are critical criteria for ensuring the best pump is chosen to meet your requirements.

Here's how to choose the best pump for your application:

1. Medium

The most important criterion when selecting the appropriate pump is the material. Liquids are highly variable in their viscosity and chemical properties. No pump can satisfactorily convey all media - and, of course, the pump must also be resistant to the medium to be filled. Depending on the requirement, pumps are therefore optimized for different hazardous substances.

Pumps for mineral oil products

Mineral oil pumps are optimized for pumping oils, lubricants, and fuels and, therefore, suitable for use with different viscosities.

View Products

Pumps for chemicals, acids and alkalis

Safely handling acids, alkalis, and chemicals also requires specially equipped pumps. Small pumps for drums, chemical-resistant container pumps, or high-throughput pneumatic diaphragm pumps are suitable for various applications.

View Products

Pumps for flammable liquids

Adapters allow for the exact fitting of bungs. Stainless steel hand pumps will enable you to pump flammable liquids or chemicals safely. Polypropylene pumps are resistant to weak acids, alkalis, and cleaning agents. Earth cables with Atex approval prevent any risk of explosion through static build-up and are available as separate accessories.

View Products

Resistance lists:

Here you will find resistance lists in which we have already assigned the most suitable products to many common liquids:

Resistance list for selection of manual drum pumps

Important for the choice of a suitable hand pump are the size and type of container, as well as the desired flow rate and the suitability of the pump for the medium to be filled. The pump must be resistant to the medium to be filled. In many areas, special occupational safety and environmental protection regulations must also be observed, e.g. for explosion protection.

Important note: The information was determined based on laboratory tests with raw materials. Plastic parts manufactured from raw materials are often subject to influences that are not detected in laboratory tests. For these reasons, the values given are only a recommendation. No legal claim can be derived from this information. In cases of doubt, we recommend carrying out a test. In addition to chemical resistance, other relevant regulations, e.g. explosion protection, must also be taken into account.

Resistance list for the selection of electric drum pumps

2. Mode of operation

Depending on how often and for what flow rates you want to use your pump, there are different modes of operation: Manual, electric, and compressed air.  While electric and compact air pumps are usually designed for larger containers and, above all, allow a quick filling of large quantities, hand pumps are more suitable for the occasional filling of small amounts. The viscosity of the media to be pumped also has a considerable influence on the selection of the mode of operation.

We have summarized the advantages and disadvantages for you below:

Electric Pumps and Compressed Air Pumps

The safe handling of liquids of different viscosities requires the use of special pumps, especially for large containers or viscous substances.

View Products
Pros
Efficient & ergonomic for large flow rates
Efficient & ergonomic for viscous substances
Suitable for frequent and/or permanent operation
Cons
Air or power supply required locally

Manuel drum pumps

Manuel filling of liquids or chemicals from drums requires specially equipped pumps. Depending on the equipment, a foot operation is also possible.

View Products
Pros
Fast and flexible use
Economical
Cons
High power & time required for large flow rates
High force & time required for viscous substances
May not be suitable for heights
Not suitable for continuous use

Are you pumping from large containers?

To remove some liquid from a drum quickly and easily, it is also possible to use a hand pump. Depending on the model, the immersion tube can be adjusted to the depth of the container - and, therefore, also enables the removal of small quantities from larger containers. For filling larger quantities from drums or filling from IBC, electrical or compressed air pumps are more suitable. Models with different depths are also available as finished sets.

Electric or compressed air?

On the one hand, this depends on the connections available during operation. On the other hand, compressed air pumps can achieve better results, especially with "difficult" substances. Compressed air diaphragm pumps are even suitable for abrasive or solids-containing substances, as well as media with extremely high viscosity.

3. Special requirements & practical accessories

DENIOS Safety Tips for Filling from Barrels

Always remember your Personal Protective Equipment (PPE)

Before you begin any filling or refilling work, you must ensure that you are wearing suitable personal protective equipment (PPE). This legal requirement can include items such as goggles, gloves, and hard hats - depending on the type of work that you are carrying out.

Depending on which substance you want to pump and what your operating instructions specify, you may also need additional equipment, such as aprons to protect your body and respiratory equipment.

It may be appropriate to implement monitoring measures for employees to ensure that you can offer rapid assistance in an emergency.

Best precautions to prevent drip losses

When removing pumps from containers, trailing liquid can lead to drip losses. Safety stands for barrel pumps with an integrated collecting container that offers reliable protection. However, it is advisable to do filling and decanting work only in specially designated areas, not within passageways and traffic routes.

You may also need to use a suitable absorbent to catch any spillage.

Additionally, you can place the drum on a spill pallet to catch drip losses.

To guarantee that leaks are detected, install a SpillGuard® - the new hazardous substance warning system available only from DENIOS. Created by our experts, this revolutionary alarm system quickly and efficiently detects leaks, releasing a continuous alarm and LED light system over 24 hours.

Funnels from DENIOS

To prevent leakage of dangerous liquids during transfer, the use of funnels is recommended.

DENIOS funnels are made of durable polyethylene or sturdy steel, and there is an extensive range of sizes to meet different requirements.

View Products
We are happy to help you!

You can get personalized guidance and service delivered right to you. Our sales reps are dedicated to meeting your needs with exceptional care—benefit from our range of service options, including phone, mail, or in-person assistance.

Professional guidance 1-877-388-0187

Related Content

Loading...
Menu
Log in
Your basketAdded to basket
Go to basket
We would be pleased to provide you with advice!

Give us a call or fill out the form and we will get back to you as soon as possible.

Mon - Thu: 08:30 - 17:00 | Fri: 08:30 - 17:00