DENIOS INC
1152 Industrial Blvd.1
Louisville
KY 40219

Tel.: +1 502 9337272
Email: info1@denios-us.com
Internet: www.denios-us.com

Temporary Leak Protection

RuptureSealTM is a line of quick and easy leak-stopping devices that is durable, easily deployed in seconds, and forms a secure mechanical seal that stops the leak for hours. Using newly patented technology, RuptureSealTM can safely close breaches, minimize damage, help protect the environment, preserve health and safety, save thousands of dollars through spill remediation, and save lives.

Keep it on close by in case of an emergency leak – share up to 10 hours of relief until a permanent fix is available. This industrial-grade, temporary leak protection is operated quickly by compressing a silicone pad into the rupture; it is pulled back quickly on the handle, and the seal becomes mechanically fastened.

The BEST solution for fuel & chemical spills

Better than tape. Better than foam...

Rupture Seal products are available in 4 sizes and compatible with over 40,000+ substances - more than any other product on the market. In just seconds, Rupture Seal creates a safe mechanical seal to plug even rough, unclean, or splintered surfaces, making it the best all-in-one solution for the control of fuel and chemical spills, for hazmat and first responders, transport container and saddle tank ruptures, forklift punctures, pipe leaks, breaches and more. Faster to deploy than puddy compounds, urethane foam, or wooden/screw plugs - and more accessible to remove after the fact. And unlike sealing tape, Rupture Seal is compatible with fuel leaks.

A fuel leak from as small as a 2" puncture can result in an average of $15,000 in clean-up costs. Your response needs to be fast, clean, and effective. You need a Rupture Seal!

Deploys in Seconds!

Step 1:

Approach the rupture from the side, outside the path of the liquid flow. Flip the pin so it is parallel with the nylon tie.

Step 2:

Insert the pin into the rupture. Once the pin is in the rupture, quickly let go and drive the plug into it, holding it in place to stop the liquid flow.

Step 3:

As you push the plug into the rupture, GENTLY pull on the handle. When the handle is fully extended, and the clicking stops, the RuptureSealTM is deployed.

We are happy to help you!

You can get personalized guidance and service delivered right to you. Our sales reps are dedicated to meeting your needs with exceptional care—benefit from our range of service options, including phone, mail, or in-person assistance.

Professional guidance 1-877-388-0187

Related articles

Loading...
i

The specialist information on this page has been compiled carefully and to the best of our knowledge and belief. Nevertheless, DENIOS Inc cannot assume any warranty or liability of any kind, whether in contract, tort or otherwise, for the topicality, completeness and correctness either towards the reader or towards third parties. The use of the information and content for your own or third party purposes is therefore at your own risk. In any case, please observe the locally and currently applicable legislation.

Menu
Log in
Your basketAdded to basket
Go to basket
We would be pleased to provide you with advice!

Give us a call or fill out the form and we will get back to you as soon as possible.

Mon - Thu: 08:30 - 17:00 | Fri: 08:30 - 17:00